How to charge your CropX Sensor

You are here:
< Back

Step 1: Gently remove the 5 screws on top of sensor.

Step 2: Remove the charging socket cover.

Step 3: Connect the USB cable to the USB cable port (cable provided) and connect to any USB power adapter.

Step 4: Allow the sensor to fully charge for at least 10 hours, until the light changes to blinking blue (this may take up to 24 hours, depending on the charging source).

Step 5: Before reattaching the charging socket cover, make sure the rubber sealing ring is in place.

*In case of recharging with a Power Bank, the Specifications should be: Output: DC 5V Capacity: At least 11000 mAh
Previous Article Is signal strength affected by crop growth?
Table of Contents